".. Sunday, May 21, 2017 7:42 PM
I just received an AS186 air compressor that I bought on eBay but the air gauge does not appear to function correctly, with no air in the system the gauge always indicate 20 psi."
".. Monday, May 29, 2017 9:27 AM
Look like the needle is the problem because this compressor is suppose to automatic turn off when air pressure reaches 57 psi but mine stop at around 77 psi.
I bought this compressor on eBay and I sent 6 messages to the seller in one week and still no reply, maybe it's time for a negative feedback."
"..The "KMS Compressor AS186" is typical of
many made-in-China, single piston with tank airbrush compressor. It can work quite well for modeling. I
reviewed a similar unit awhile back. It costed me $40 plus shipping from Northern Tools in the US last year.
^^^-- okolo 150 PLN.
The problem with these
Chinese compressors is their quality control.
If lucky, you may get one that serve you well for many years.
If not, you may need a new one in a few months.
You should test your new compressor by running it continuously for about 30 minutes or so. Push down the airbrush trigger to force the compressor motor to run constantly. The compressor head temperature should stablize and stay at no more than 20-25 degrees C above room temperature. The compressor head should not be hot to the touch if you cannot borrow a laser thermometer from the kitchen. If the compressor is working normally, this test will not hurt it. If not, it is better to know that you may have received a low quality unit when it is still under warranty. In reality, the compressor should run much cooler because the motor is on and off intermittently in normal modeling."
Powyzej podano dobry, krotki test na zachowanie sie urzadzenia. W kazdym razie jesli jest niesprawne w jakimkolwiek zakresie, nalezy je reklamowac, chocby dla zasady.
